Solids handling pumps for filtration, waterfalls and watercourses.
Key Benefits Include:
- Fish Protection System – protects small fish from accessing the pump
- Large cage surface area reduces cage clogging & improves water purity
The range of Aquaforce filter and waterfall pumps have been developed to be tough, trouble free and efficient.
Self Cooling System – the motors feature a water-cooling system, which ensures that the pumps are kept at a constant temperature and reduce the risk of overheating.
Ceramic Bearings – maximise pump life and along with thrust washers ensure the motors are ultra reliable.
Fish Protection System – all Aquaforce pumps include a removable Fish Protection System that allows you to reduce the inlet from 6mm/10mm to 2mm, to prevent fish getting into the cage.
Conical Impeller – maximises performance.
Carry Handle – integral carrying handle for easy lifting in and out of the pond.
Solids handling pumps for filtration, waterfalls and watercourses
How does Aquaforce work?
Pond water is drawn in through the cage grill which filters out coarse solids up to 6mm/10mm in size (dependent on model). Smaller particles down to 2mm in size can be eliminated by fitting the supplied clip-in fine mesh filter tray which affords the best possible protection for pond fish, preventing them from accessing the pump.
The Aquaforce has a considerably increased cage surface area, which allows the maximum amount of waste to be collected and pumped to the filter system. It also means that the cage is far less likely to clog, which will save you from constant cleaning.
Most common Aquaforce set up:
The Aquaforce pumps are particularly suitable for pumping water to external filters or for use in high flow waterfalls or watercourse applications where low maintenance is important.
For the best results, the pump should be positioned in the deepest part of the pond at least 200mm under the surface. This will ensure the best circulation of water in the pond and when being used as a filtration pump, its solids handling capability will be maximised.
The larger models (6000, 8000, 12000 & 15000) feature a second inlet and flow control. The second inlet allows the use of a skimmer or satellite filter and the flow control allows the adjustment of the flow of water to a waterfall or filter. It also allows the control of the amount of water being drawn from the second inlet.
If a skimmer is used to pump surface debris to the filter, the flow control will adjust the balance of water taken from the main cage and the skimmer.
The larger Aquaforces are also able to operate amphibiously, which gives the option to operate the pump on dry land while the cage remains submerged.
Alternatively, a second filter can be attached and sited in a ‘dead’ area of the pond if there is one, or in an adjacent smaller pond.
3 year guarantee + additional 2 years if you register online. Excluding rotor assembly. Terms and conditions apply*.
*Terms and Conditions:
Hozelock Cyprio 3+2 year guarantee.
If this pump, excluding the rotor assembly, becomes unserviceable within 3 yers of the date of purchase it will be repaired or replaced at our option free of charge, unless in our opinion it has been damaged or misused. To extend this guarantee to 5 years please register at http://www.hozelock.com/guarantee/
Liability is not accepted for damage due to accident, improper installation or use.
Liability is limited to replacement of a faulty pump.
This guarantee is not transferable. It does not affect your statutory rights. To obtain the benefits of the guarantee, firstly contact Hozelock Cyprio Consumer Service who may request that the pump is sent along with proof of purchase directly to the address below.
Midpoint Park, Birmingham
B76 1AB Englad
Telephone: 0121 313 1122
Litres per hour
1,000lph, 2,500lph, 4,000lph, 6,000lph, 8,000lph, 12,000lph, 15,000lph
Combined Filter and Pump